Standard Boat Covers

SeaSwan boat covers are available for any type of craft. Our standard cover range includes our innovative self supporting RIB covers for some of the most popular RIB ranges. These allow the fitting of the cover over multiple internal craft layouts, offer excellent rain water run off and can incorporate lighting frames where required.

Covers are manufactured in quality fully waterproof UV stable Polyester fabric yet still light enough to fit easily and stow in the stowage bag supplied into an on deck locker.

Our covers are available for number of standard boat ranges, please select from the menu below. If your boat is not listed here or you have any special requirements then please use our enquiries form to request a price for your cover.

Roll over the selected areas for more detalied information about the covers.

@ +44 (0) 1554 785114

sales@seaswan.co.uk
Where a lighting frame needs to pass through the cover a large sleeve is positioned with velcro fixing around the back edge of the frame.
Covers can are produced in two versions, full covers wrap under the buoyancy tube and are provided with tie down points to fix down to a trailer. Clip on covers, as shown, are designed for use on the water and are provided with wide pre-tensioned clips which hook onto the rubstrake. (Available on selected ranges only)

Each standard cover is produced with two integral multi-sectioned flexible poles. This keeps the cover tensioned and eliminates the risk of puddles forming in the cover and causing stretching and damage to the fabric. The poles fold and remain in the cover when stowed away.

The poles run as a V shape to the bow on all boats up to 6.2m length and as an X shape across the boat on boats over 6.2m long.

The bow profiles are shaped to fit each individual boat type and extends over the rubstrake area to ensure the bouyancy tubes stay clean and protected.
All covers are provided with integral covers for a single engine of a size applicable to the boat size. An allowance is made in the engine cover to allow the engine to be positioned either down or on full tilt.